yanglulu48

I had find many products about Color Mini Ptz Dome Camera. Description: ICEC Mini PTZ Domes are convenient to install on a hard surface. Units represent state-the art, DSP based camera technology of standard PTZ Domes in a cost effective and much smaller form factor. Featured are vandal IP66 rated housing, a compact integrated camera module and multi-protocol receiver driver system. Included are128 presets and easy to operate OSD menu. ICEC Mini PTZ Domes are designed to meet the most demanding commercial video surveillance installations. Video Specifications: Video Output: BNC Camera ID range: 1-254 Data Specifications:Receiver/Driver: Built-in w/multi-protocolsData Interface: RS-485/Rs-422Baud rate: 2400, 4800, 9600, 19200pbsDip Select Protocols: Pelco P/D, Ernitec Kalate, Panasonic, VCL, AD, Molynx, Vicon,etc) Electrical Parameters: Input Voltage: 12VDC 50/60Hz, 1.5A Mechanical Parameters: Manual Pan Speed: 0.5Degree-160Degree/sec Manual Tilt Speed: 0.5Degree-90Degree/sec Rotation travel: Pan 360Degree

And you can see more from nikon spotting scope cctv monitoring cameras wholesale canon camera customized conversion lens infared ccd camera digital hunting camera megapixel video camera hidden spy camcorder daynight cctv cameras

A Leica R series teleconverter, with the female side of the Leica R bayonet mount. This side is also used on the camera body.

nd the male side.
A lens mount is an interface mechanical and often also electrical between a photographic camera body and a lens. It is confined to cameras where the body allows interchangeable lenses, most usually the single lens reflex type or any movie camera of 16 mm or higher gauge. Lens mounts are also used to connect optical components in instrumentation that may not involve a camera, such as the modular components used in optical laboratory prototyping which join via C-mount or T-mount elements.
A lens mount may be a screw-threaded type, a bayonet-type, or a friction lock type. Modern still camera lens mounts are of the bayonet type, because the bayonet mechanism precisely aligns mechanical and electrical features between lens and body. Screw-threaded mounts are fragile and do not align the lens in a reliable rotational position, yet types such as the C-mount interface are still widely in use for other applications like video cameras and optical instrumentation.
Bayonet mounts generally have a number of tabs (often three) around the base of the lens, which fit into appropriately sized recesses in the lens mounting plate on the front of the camera. The tabs are often "keyed" in some way to ensure that the lens is only inserted in one orientation, often by making one tab a different size. Once inserted the lens is fastened by turning it a small amount. It is then locked in place by a spring-loaded pin, which can be operated to remove the lens.
Lens mounts of competing manufacturers (Nikon, Canon, Contax/Yashika, Pentax, etc.) are almost always incompatible. Many allege that this is due to the desire of manufacturers to "lock in" consumers to their brand. However, since there are other differences between manufacturers specifically the flange focal distance from the lens mount to the film or sensor one would not want to mount a lens which wasn't specifically designed for their type of camera, at least not without an adapter to correct the spacing.
In movie cameras, the two most popular mounts in current usage on professional 35 mm cameras are Arri's PL mount and Panavision's PV mount. The Panavision mounts are exclusively used with Panavision lenses, and thus are only available on Panaflex cameras or third-party cameras "Panavised" by a Panavision rental house, whereas the PL mount style is favored with most other cameras and cine lens manufacturers. Both of these mounts are held in place with locating pins and friction locking rings. Other mounts which are now largely historical or a minority in relation to current practices are listed below.
Contents
1 List of lens mount types
2 List of lens mounts
2.1 Legend
3 Secondary lens mount
4 Notes
5 References
5.1 General references
6 See also
7 External links
//
List of lens mount types
These types are organized by category; find details in the section that follows.
Stills
Canon EF
Canon EF-S
Canon FD
Canon FL
Contax N
Contax/Yashica bayonet
Four Thirds System
Fujica X bayonet
Konica original bayonet
Konica AR 47mm bayonet
Leica M mount
Leica R bayonet
M42
Mamiya bayonet
Micro Four Thirds System
Minolta AF
Minolta V
Minolta MD
Miranda bayonet (all Miranda cameras had a dual bayonet/M42 screw mount)
Nikon F
Olympus OM
Pentax K
Sigma SA
T-mount (T-thread)
Yashica AF
Cine
Aaton universal
Arri bayonet
Arri PL
Arri standard
B4
BNCR
C mount
CA-1
PV (Panavision)
Industrial
C mount
CS mount
Front-plate mount
List of lens mounts
This list of lens mounts is ordered by flange focal distance, from shortest to longest. It includes both digital, still photography and movie lens mounts.
OEMmodelline(s)
Interchangeabletypename
Framesize
Cameratype
Throatorthreaddiameter
Mountthreadpitch
Mounttype
Flangefocal distance
D mount
8 mm
movie and CCTV
0.625 inch
32 TPI
Screw
12.29 mm
CS mount
16 mm
movie and CCTV
1 inch
32 TPI
Screw
12.52 mm
C mount
16 mm
movie and CCTV
1 inch
32 TPI
Screw
17.526 mm (0.69 inches)
Canon EX
Camcorder
Bayonet
20 mm
Micro Four Thirds
digital still
~38mmA[?]
Bayonet
~20 mm
Bolex
16 mm
movie
Breech lock
23.22 mm
Leica M bayonet
35 mm
still
44 mm
Bayonet
27.8 mm
Canon screw mount
35...(and so on)

You can also see some feature products :

song digital camera f theta lens coin operated binocular 25 tools scope lens aspherical lens camera and camcorders cell phone magnifier vehicle safeguard camera infrared cctv camera rearview parking camera water resistance camera 1.48 finished lens canon minidv camcorder dental operating microscope dv hd camcorders license plate cameras Pixel Digital Camera panasonic tz3 camera 6mp digital cameras plate recognition cameras fog light lens